Improve Your Car Performance Free – Improve Engine Performance

Removing the catalyst from the car can improve the performance of your engine in the sense that it will be more powerful. However, you must bear in mind that you will pollute the atmosphere more and from the acoustic point of view. It is even possible that you have problems to pass the ITV or that you get fined if you contaminate over the allowed.

If you want to read more articles similar to How to improve the performance of the car engine , we recommend you to enter Car repair and maintenance .

How To Make Your Car Faster For Free

The workshops want to put their grain of sand to contribute to road safety and minimize the environmental impact of cars, but drivers can do a lot of our part if we take care of our vehicles. Above all, these ten points:

1. Shock absorbers – Avoid Pains

The shock absorbers provide comfort in driving and represent a guarantee of safety since they help to control the vehicle at high speeds and in situations of risk. In fact, it is considered one of the three essential components of the so-called “safety triangle”, along with tires and brakes .

The correct operation of a shock absorbed depends on several factors, such as the state of the road, the load of the vehicle, the mileage and the effects of wear such as cold, heat and humidity. The action of these factors causes that the effect of the shock absorber is gradually reduced, until it stops working correctly. As it is not a very noticeable wear for the driver , it is advisable to carry out periodic inspections every 20,000 kilometers .

How To Make Money From Junk Cars

2. Wiper blades

In case of rain , the wiper blades play a fundamental role. If they do not sweep well and do not properly evacuate the water, (or hail or snow), they prevent precious information from reaching us in our eyes. A few seconds can be vital.

If the brushes leave areas to sweep, cause strange fogs, make noise or jumps, the time has come for their replacement. ASETRA advises you to change after the summer . There is nothing worse for its components than the prolonged days of sun and high temperatures. Now, in addition, tend to incorporate wear detectors very interesting to incorporate.

3. Filters

You should control them at least once a year .We are again explaining All filters to care separately

OIL FILTERS

does changing oil improve performance ? The normal wear of the engine implies the appearance of metallic particles that detach from the components and end up in the lubricant. The purpose of the oil filter is to retain these particles which impair the performance of the engine or even seriously damage it. Since the oil replacement periods have been greatly extended in new vehicles and despite the fact that the quality of the filters has improved significantly, it is essential to replace this element each time the lubricant is changed . If you dare to change the oil yourself , you can follow these seven steps.

AIR FILTERS

A filter in good condition guarantees that the air that reaches the engine does not contain abrasive particles. In this way, combustion is carried out under the best conditions and fuel consumption is maintained at the levels included in the vehicle catalog, as is the case with polluting emissions.

It is important that the filter is always checked in the maintenance operations of the vehicle. The end of his life depends a lot on the places where he circulates. Hence, in case of walking on dusty roads usually, it is necessary to proceed much more frequently to its replacement than if driving in much cleaner environments.

FUEL FILTERS

Its operation differs in the case of gasoline vehicles : remove impurities from the fuel before they reach the engine, while in vehicles that run on diesel, they serve to eliminate water and prevent corrosion of the metallic elements of the engine. In both cases, your task is paramount to ensure the health of the engine . They should be checked whenever the vehicle enters the shop for maintenance.

PASSENGER FILTERS

If the rest of the filters that are mounted on a vehicle are intended to ensure the health of the car’s engine, the interior engine deals with the health of its occupants . As it does? “Catching” dust particles and pollen grains that are suspended in the environment. They avoid, therefore, that they enter the vehicle and reduce its negative incidence, especially in allergic ones, in addition to providing a sensation of cleanliness and well-being inside the passenger compartment. Important especially when traveling with an allergic .

4. Tires

Many factors influence the useful life of a tire : from the components of the tires themselves and the storage prior to their sale, to the driving style of the user, or the weather and the characteristics of the road on which the tire rolls. Therefore, it is very difficult to determine an estimated number of kilometers ( there are brands that last longer than others ). However, being the link between the car and the road, its role in safety is paramount. You must correctly maintain the pressure indexes recommended by the manufacturer. It is advisable that you are always very aware of the appearance of vibrations and noise, of the anomalous wear (greater by some areas than by others), of any strange behavior detected in a braking. It may be time for the change and even to warn us of failures in other components related to security. ASETRA recommends going to a specialist at least once a year if the tires have been installed for more than four years, when the annual mileage does not exceed 14,000 kilometers. If more kilometers are made, it is convenient to visit the workshop before.

5. Brakes

With the brakes in poor condition we will need more meters to stop the car in any emergency. The wear of the components of the braking system depends a lot on the characteristics of the driving and also on the usual means by which the vehicle rolls (jams in the cities, routes in mountain, with abundant curves, etc).Therefore, it is very important that this system is reviewed by a specialist at least once a year . It is not easy to detect, since the components of the brake are deteriorating little by little and, unless the difference is very marked (it goes to one side, take “react”, noises, chirps, etc.) in which case the step The workshop should be immediate. We have already talked about how to keep the brakes in good condition .

6. Lubricants

The lubricants minimize the wear of the engine parts, channel metal particles arising from this wear to the filter, help cooling and avoid tiny leaks in the circuit due to its sealing properties.

The lifespan of lubricants has risen a lot in modern cars. Twenty years ago, the average change was around 5,000-8,000 kilometers, but today vehicle manufacturers talk about replacement more distant, over 30,000 kilometers for their new models … but expand more than 15,000 kilometers the change of lubricants causes the engine to suffer excessively.

The workshops advise to check the level of the lubricant deposit (every 1,500 kilometers), an excellent custom that saves many scares … and that saves troubles and money. If you must replace, choose the type of lubricant recommended by the vehicle manufacturer.

7. Lighting

The headlights of your vehicle allow you to see … and be seen. It is no longer mandatory to carry spare lamps in the car (due to the difficulty of its assembly and even to the electrical risks that the exchange operation can involve in certain vehicles), we must not forget that it is obligatory to maintain the system of lighting and signaling in optimal conditions .

To do this, it is advisable to check the correct operation of all the lights (position, crossing, road, brake, reverse, intermittent and fog lights) monthly and to keep their outer surface free of mud and dirt . Also, whenever any irregularity is detected (a decrease in intensity, for example) a specialist should be consulted.

8. Exhaust system and catalysts

The exhaust systems have as a double mission in the care of the environment: they must reduce the polluting emissions and the noise of the gases when leaving the engine. Its deterioration can not be avoided, due to its hard task, especially when it is circulating a lot in cities or on irregular pavements. You will notice leaks or corrosion due to a lack of engine power and the increase in lubricant consumption .

Likewise, and according to the main manufacturers, circulating with catalysts or defective exhaust pipes can increase the danger of fire of the vehicle and cause suffocation and poisoning in enclosed spaces.

The catalysts stop covering their protective function of the environment at 80,000 kmpor that is worth reviewing from 60,000 kilometers . To avoid damaging it, it is advisable to avoid getting on the curbsand warm the vehicle by keeping the car idling for a couple of minutes before starting the journey.

9. Distribution belt

The timing belt synchronizes the four times of the engine, the opening and closing of the intake and exhaust valves and the spark of the spark plug. It is very important to follow the advice of the manufacturer of the vehicle because, being an element that wears out, its breakage can cause a serious and expensive engine failure .

It is practically impossible for an average driver to detect deterioration, so the best forecast is to replace it with an average unit based on the intervals recommended by the manufacturer.

10. Environment

Some of the parts that are replaced in vehicles are considered hazardous waste and are very polluting (besides being considered a crime). The vehicle repair and maintenance workshops comply with strict regulations for the correct recovery and recycling of waste.

How To Improve Your Car Mileage

1. Always Buy the correct tire

For the proper functioning of your car you need the correct tire and for the correct application. Check the tire size recommended by the vehicle manufacturer, this information is found on the driver’s door or in the vehicle’s user manual. Inadequate band design on the rim reduces mileage.

2. Perform the alignment and balance of the tires periodically

This helps the wear is even and takes maximum advantage of the life of the tires.

3. Check that the inflation pressure of the tires is correct to avoid uneven and premature wear

Check the inflation pressure recommended by the vehicle manufacturer, this information is indicated on the driver’s door. It is recommended to do this verification when the tire is “cold” or that has not been driven for a long time, since with the movement internal friction is created and the pressure tends to increase. This can cause us to believe that we are at the right pressure and could actually be below the recommended pressure in a range between 2 to 5 psi.

4. Make an adequate tire rotation every 5000 km

This to avoid irregular wear by use.

5. Watch your cargo

The tires are designed to support a certain load and the vehicle also, in cases of overload it is recommended to change the size of the rim by one of greater capacity.